Guide in PDF format
Logo

Introduction to Materials Physics

Code: 103948
Credits: 5
2026/2027
Degree programme Type Course
Physics OP 3

Contact lecturer

Name :
Alberto Quintana Puebla
Email :
alberto.quintana@uab.cat

Group languages

You can consult this information at the end of the document.

Prerequisites

They do not exist

Objectives

This cours is about bringing students closer to the world of materials science. The physical properties are related to the applications and a brief incursion into the technological materials.
It is aimed at students who want to study materials science related to students interested in solid state physics and, in general, to students who want to relate the physical properties that they study in their career with them applications

Learning outcomes

  1. Communicate complex information in an effective, clear and concise manner, either orally, in writing or through ICTs, in front of both specialist and general publics.
  2. Use critical reasoning, show analytical skills, correctly use technical language and develop logical arguments
  3. Describe the various types of existing materials and their differences.
  4. Describe the relationship between the structure, properties, processing and applications of materials.
  5. Distinguish the fields of application for different types of microscope (optical, electronic, tunneling or atomic force).
  6. Relate the properties of materials with their application to engineering.
  7. Establish the foundation for the study of nanomaterials and their application in society.
  8. Use calculation in the parameterization of material properties.
  9. Work independently, take initiative itself, be able to organize to achieve results and to plan and execute a project.
  10. Identify situations in which a change or improvement is needed.
  11. Identify the social, economic and environmental implications of academic and professional activities within one's own area of knowledge.
  12. Explain the explicit or implicit code of practice of one's own area of knowledge.

Contents

  1. Introduction: Importance of materials science and engineering. Types of materials.
  2. Materials structure
  3. Imperfections and mechanisms of diffusion in solids
  4. Phase diagrams and phase transformations
  5. Materials properties and characterization techniques
  6. New materials


Learning activities and methodology

Title Hours ECTS Learning outcomes
problems solved 21 0.84 4, 6, 8
personal work 33 1.32 3, 4, 5, 6, 7, 8
theoretical classes 27 1.08 3, 4, 5, 6, 7
tutorials 2 0.08 6, 7
problems solved in the class 14 0.56 3, 4, 6, 8
thematic work 20 0.8 3, 4, 6, 7

Lectures

Lectures will consist of a set of presentations in PowerPoint on the concepts and fundamentals of materials science. Students will have this content in sufficient time to prepare the classes and follow them properly.


Problems class

The student will have a list of problems that will be facilitated throughout the course. The classes of problems will be coordinated with the theoretical classes, so that the students will be able to consider themselves and, in some cases, to solve the problems themselves. The list of problems is a set of exercises that illustrate the theory's content.


Tutorials

Throughout the course, the individualized discussion between the students and the teacher/s will be encouraged.


Thematic work

The students, divided into groups, will have to present oral and publicly a work to choose from a list, suggested by the teachers, of topics related to the world of \"new materials\".

AI use

In this course, the use of Artificial Intelligence (AI) technologies is permitted exclusively for academic support tasks, such as literature or information searches, text proofreading, or translation. Students must clearly identify any parts generated using these technologies, specify the tools employed, and include a critical reflection on how they influenced both the process and the final outcome of the assignment. Failure to disclose the use of AI in this assessed activity will be considered a breach of academic integrity and may result in a partial or full deduction of the assignment grade, or more severe disciplinary sanctions in serious cases.

Annotation: within the schedule set by the centre or degree programme, 15 minutes of one class will be reserved for students to evaluate their lecturers and their courses or modules through questionnaires.

Assessment

Continuous assessment activities

Title Weight Hours ECTS Learning outcomes
resit exam 80% 3 0.12 3, 4, 5, 6, 8
thematic work (oral presentation) 10% 1 0.04 1, 2, 3, 4, 5, 6, 7, 11, 12
midterm exam* (2 partial tests) 80% 4 0.16 3, 4, 5, 6, 7, 8
Classroom problem solving 10% 0 0 2, 3, 4, 5, 6, 8, 9, 10

Continuous Assessment

The assessment of the course will consist of:

  • 2 midterm exams, accounting for 80% of the final grade (40% each).

  • 1 thematic project on new materials, worth 10% of the grade.

  • Problem-solving sessions in class under the supervision of the teaching staff, worth 10% of the grade.

If the overall grade obtained is below 5.0 (out of 10 points), the course will be considered not passed (fail). In this case, the student may take a resit exam, which will account for 80% of the total grade. The in-class problems and thematic project cannot be retaken and must be submitted in order to pass the assessment.

A student will be considered \"Not Presented\" if they do not take the second midterm exam or any resit exam.

Single Assessment

Students who have opted for the single assessment mode will take a final test consisting of:

  • A theory exam with short-answer questions.

  • A problem-solving test with exercises similar to those practiced during class sessions.

  • Upon completion, students must submit a written assignment (minimum of 5 pages) on one of the proposed seminar topics.

These assessments will take place on the same day, time, and location as the second midterm exam for the continuous assessment mode.

The student’s grade will be the weighted average of the three components:

  • Theory exam: 80%

  • Problem-solving test: 10%

  • Seminar paper: 10%

If the final grade is below 5, the student will have another opportunity to pass the course through a resit exam, which will be held on the date set by the program coordination. In this exam, up to 90% of the grade (theory and problems) can be recovered. The written paper component is not recoverable.

tudent has another opportunity to pass the subject through the remedial exam that will be held on the date set by the degree coordinator. In this test you can recover 75% of the grade corresponding to the theory and the problems. The written part of the work is non-refundable.

Bibliography

Theory books and / or problems

 

  • Class notes: Campus Virtual UAB.
  • Ciència dels materials; M.Cruells et al.; Publicacions i edicions de la Universitat de Barcelona, 2007.
  • Ciencia e Ingeniería de los materiales; D.R.Askeland, Ed. Paraninfo, Madrid, 2001.
  • Ciencia e Ingeniería de los Materiales; W.D.Callister y D.G.Rethwisch, 2ªed Ed. Reverté 2016
  • Fundamentals of materials science and engineering, an integrated approach; W.D.Callister 3ª ed. Ed. John Wiley, 2008.
  • Introducción a la Ciencia de Materiales para Ingenieros; J.F.Shackelford, 6a ed., Prentice Hall, Madrid, 2005.
  • Solid State Physics, An introduction; Hofmann, P. ; 2nd Edition, Wiley-VCH 2015
  • Callister, William D., and David G. Rethwisch. Ciencia e Ingeniería de Materiales, Editorial Reverté, 2019. ProQuest Ebook Central, https://ebookcentral.proquest.com/lib/uab/detail.action?docID=6798944.

 

 

 

 

 

 

 

Software

This subject does not use any particular software

Course groups and languages

The information provided is provisional until November 30. After this date, you will be able to consult the language of each group through this link. To access the information, you will need to enter the course CODE

Type of teaching Group Language Semester Shift
(TE) Theory 1 Catalan second semester morning-mixed
(PAUL) Classroom practices 1 Catalan second semester morning-mixed